Camera footage
Before and after view of the line
A cable punches through a blockage. A hydro jetter scours the full pipe wall, removing grease, scale and roots so the line stays clear. El Primo Lalo Plumbing jets drain and sewer lines in Houston, camera-checked first, at 1,500 to 4,000 PSI matched to the pipe.
Every jetting call covers the same ground: camera, jetting, verification and cleanup. If the camera shows a pipe that cannot take the pressure, we say so before we jet.


We jet kitchen, bathroom and main lines for Houston homeowners, from grease-coated kitchen runs to root-blocked mains. Every visit starts with a camera check.
Restaurants, salons and multi-family properties need lines that stay clear through service hours. We jet grease lines and floor drains before they back up, on a schedule that fits the business.
Hydro jetting uses high-pressure water to scour the inside of a pipe back to bare wall. The operating range cited for Houston work is 1,500 to 4,000 PSI, with the nozzle and pressure matched to the pipe material. It is the right tool for heavy grease, scale and tree-root intrusion, and for lines that clog again weeks after a cable clearing.
Jetting is not right for every pipe. Structurally compromised cast iron can be finished by the pressure that corrosion started, so the camera check before jetting is not optional: it shows whether the line can take a jetter or needs a gentler method, or repair instead. Jetting is also the step that stops repeat backups, because a cable only opens a channel through grease while a jetter removes it.
A cable punches a hole through the clog. A jetter cleans the pipe.
Every jetting call follows the same five steps, so you know what is happening and what the pipe can take.

Scours grease, scale and roots from the pipe wall at pressure matched to the pipe.

Inspects the line first, so we know the pipe material and whether it can take a jetter.

Different nozzles for grease, scale and roots, matched to the pipe and the blockage.

Clears the line first where a cable is the right opening step before jetting.

Cuts root hairs at joints so the jetter can scour the wall clean.

Opens the cleanout for camera and jetter access without opening a fixture.

Runs water through every fixture to confirm the line flows before we leave.

We look before we jet. The camera prevents broken cast iron and missed roots.
We jet the grease line before service hours and check the floor drains. A recurring schedule keeps the line clear through service.
A cable opened a channel each time, but the scale stayed. Jetting scoured the wall clean, and the backups stopped.
The camera showed root intrusion at the joints. Jetting cut the roots and cleared the line, and the camera check showed the pipe was sound enough to jet.
Grease and food waste coated the branch line. Jetting scoured the wall, and the sink drains fast again.
Jetting leads where grease and roots meet old pipe: restaurant lines in Midtown and Downtown, cast-iron scale in the Heights and Montrose, and root-blocked mains in River Oaks and Memorial. The camera decides every time.
A restaurant's grease line backed up during dinner service twice in a month. A cable cleared it each time, but the grease stayed on the wall.
We jetted the line before service hours, scouring the wall clean, and set a recurring schedule. The line has stayed clear through service since.
A cable opens a channel through grease. Jetting removes it, which is why the backups stopped.
A 1950s bungalow had a main line that backed up every few months. The camera showed scale and roots at two joints.
We jetted the line, cut the roots, and cleared the scale. The flow test showed the main draining at full capacity.
We recommended a camera check each year and a follow-up jetting if roots return.
A kitchen sink backed up every few weeks. The trap was clear, but the branch line was coated with grease.
We jetted the pipe wall clean and showed the homeowner the before and after camera footage. The sink drains in seconds now.
Hot water after washing dishes and keeping grease out of the drain keep the line clear between visits.
Most jetting calls fall into a few categories. The camera decides which ones jetting can fix.

Grease and food debris narrow the pipe until water stops moving. Jetting scours the wall clean so the line stays clear.

The clog is in the main line. We camera it first, then jet it, and if roots or a broken pipe are the cause, we explain repair options.

The cable opened a channel but left the buildup. Jetting removes the grease, scale or roots that caused the repeat.

A partially blocked main or vent pushes sewer gas back into the house. We inspect with a camera, jet the line, and confirm the traps hold water.
Jetting removes the buildup a cable leaves behind, so the same sink does not back up again in three weeks.
A backed-up line pushes water under tile and into subfloor within minutes. Clearing it properly prevents that damage.
A camera shows whether the problem is grease, hair, root intrusion, or a collapsed section of pipe.
Jetting removes scale and grease that corrode cast iron from the inside, so clean pipes last longer.
Clear records you can keep and share.
Before and after view of the line
What caused the clog and pipe condition
Every fixture checked before we leave
A cable punches through a blockage and restores flow. A jetter scours the full pipe wall, removing the grease, scale and roots that caused the clog, which is why it stops repeat backups.
Snaking opens a channel through grease. Jetting scours the pipe wall so the line stays clear longer.
Cast iron scales from the inside. Jetting removes the scale a cable only pokes through.
Cutting roots clears the line, but they grow back at the same joint. A camera check shows whether they are back.

Outside these areas? Call and ask if we can reach you. (346) 776-8560
High-pressure water scours the inside of a pipe back to bare wall, removing grease, scale and roots. A cable punches through a blockage; a jetter cleans the whole pipe wall, which is why it stops repeat backups.
Not when it is done right. Pressure and nozzle are matched to the pipe material, and we camera the line first. On structurally compromised cast iron, high pressure can finish what corrosion started, so the camera check decides whether jetting is safe.
When the clog is grease, scale or roots, or the line clogs again weeks after a cable clearing. A cable opens a channel; a jetter removes the buildup that caused the clog. For a simple trap clog, a cable is enough.
Yes. Estimates are free, and you approve the written scope before work starts. We are open Monday to Sunday, 7:00 AM to 10:00 PM.
Call (346) 776-8560 for a free estimate. We camera the line first, then jet it at the right pressure for the pipe, Monday to Sunday, 7:00 AM to 10:00 PM.
Call us at (346) 776-8560 to book hydro jetting or ask a question. We are open Monday to Sunday, 7:00 AM to 10:00 PM, and estimates are free.
The fastest way to book is a phone call. Tell us what is happening and we will give you a free estimate and a time that works, Monday to Sunday, 7:00 AM to 10:00 PM.
Open Mon–Sun, 7:00 AM–10:00 PM. Free estimates.