Flat price
Approved before any work starts
Toilet repair in Houston is the work of a flapper, a fill valve, a wax ring or a flange — diagnosed first, usually in one visit. A toilet that runs all night, rocks when you sit, or leaks at the base is wasting water and, at the base, damaging the floor. El Primo Lalo Plumbing repairs toilets in Houston, usually in one visit: flapper, fill valve, wax ring or flange, diagnosed first.
Every toilet repair visit covers the diagnosis, the repair, and the test. Here's what's included in a standard call, and what we handle as an add-on when the problem runs deeper than the fixture.


A toilet that runs, leaks, or backs up disrupts the whole house. We diagnose the fixture, replace the failed part, and test the flush before we leave.
Restrooms have to work during business hours. We repair tank and flushometer toilets, work around your schedule, and test every fixture before we sign off.
Toilet diagnosis splits four ways. A running toilet is usually a flapper, fill valve or chain. A rocking or leaking base points to a wax ring or flange. A weak flush can be a clogged rim jet, a low tank level or a vent problem. A leak at the supply line is a valve or connector, not the toilet at all. Each has its own fix, and guessing wastes a visit.
Houston's hard water, about 8 grains per gallon on average, scales flappers and fill valves, so running toilets are a constant call here. A leak at the base is the one to act on fast: water under a toilet rots the subfloor quietly, and a rocking toilet will only get worse. We test the flush, the fill and the base seal before we leave.
A running toilet is a flapper. A rocking toilet is a wax ring. Know which before you start.
You'll know what's happening at every step. Here's the sequence from your first call to the final flush test, with realistic timeframes for each stage.

Used to break loose supply line nuts and shutoff valve connections without rounding the fittings. A proper wrench size prevents damage to brass fittings that a household adjustable wrench can strip.

A hand-crank auger sized to the toilet trapway clears clogs without scratching the porcelain. We use it before reaching for anything motorized, which keeps the fixture intact.

For clogs past the bowl, a drain snake reaches into the branch line and breaks up paper, wipes, and scale. We feed it slowly to avoid damaging older cast iron pipe.

When a toilet backs up repeatedly, the camera shows what's happening in the line. We can see root intrusion, a cracked pipe, or a belly in the line before recommending a repair.

For grease and scale buildup in the main line, hydro jetting scours the pipe walls clean. It's the method we use when a snake clears the clog but the flow stays slow.

Used when a toilet leak isn't visible. The microphone picks up the sound of water escaping behind a wall or under a floor so we can locate it without tearing into the drywall.

Every repair follows the Uniform Plumbing Code, which sets the wax ring height, flange dimension, and supply line requirements. That means the repair passes inspection and holds up over time.

We run three full flush cycles after every repair and check for seepage at the base and supply connection. If the toilet runs on its own or the floor stays wet, the job isn't done.
That's a slow flapper leak. We replace the flapper and check the fill valve seat for mineral scale, which is common in Houston's hard water. The repair takes about 45 minutes. The phantom refills stop, and the water bill goes back to normal within a billing cycle.
We schedule a toilet repair Houston appointment during our hours — Monday through Sunday, 7:00 AM to 10:00 PM — clear the clog or replace the failed flush valve, and test the toilet before we leave. Most calls are handled in under two hours. The guest bathroom works before the doorbell rings, without a last-minute trip to the hardware store.
We handle the repair and send you photos of the failed part and the finished work. If the flange is damaged, we price that separately before doing it. The tenant has a working toilet, and you have documentation for your records without driving to the property.
We check every toilet for silent leaks, test the flappers, and inspect the supply lines. A running toilet is the most common cause of a sudden bill spike in Houston homes. You find the source, fix it, and stop paying for water that never reaches the drain.
Running toilets from scaled fill valves are a city-wide call, while rocking bases and wax-ring failures show up most in older homes in the Heights, Montrose, Sharpstown and Meyerland.
A homeowner in Oak Forest heard the toilet refill every 20 minutes and the water bill had climbed sharply over two months. The flapper was scaled shut from hard water and the fill valve was original to the house.
We replaced the flapper and fill valve with matched parts, descaled the valve seat, and ran three flush cycles. The toilet stopped refilling on its own, and the next bill dropped back to normal.
Check the flapper for scale every six months and drop a dye tablet in the tank to spot a slow leak before it shows up on the bill.
Water was seeping around the base of a toilet in a Bellaire ranch home. The wax ring had failed and the flange was cracked, which is common in slab homes of that age. The subfloor showed moisture near the flange.
We pulled the bowl, replaced the cracked flange, set a new wax ring, and reset the toilet with new closet bolts. A moisture check confirmed the subfloor dried out, and the toilet stopped leaking within one visit.
Watch for rocking when you sit down. A toilet that moves is stressing the wax ring, and fixing it early avoids subfloor damage.
A 1920s Heights home had a toilet that backed up every few weeks. Plunging worked temporarily, but the clog kept returning. The drain was original cast iron with heavy scale buildup.
We scoped the line with a sewer camera, found scale narrowing the pipe, and cleared it with a hydro jetting machine. The toilet flushed normally after the cleaning, and the backup stopped recurring.
Have the main line scoped every two years in older homes. Scale returns slowly, and catching it early avoids a full line replacement.
Most toilet calls fall into a handful of categories. Here are the ones we see most often in Houston homes, what happens if you ignore them, and how we fix them.

We replace the flapper, fill valve, or flush valve seal with a matched part, then adjust the water level and chain tension. Three flush cycles confirm the water stops completely before we leave. A running toilet wastes up to 200 gallons a day and can add a large amount to a monthly water bill. It also wears out the fill valve faster, turning a small fix into a bigger one.

We pull the bowl, inspect the flange for cracks, set a new wax ring, and reset the toilet with even closet bolt torque. A moisture check at the base confirms the leak is stopped. A failed wax ring lets water seep under the tile and into the subfloor. By the time you smell mildew, the damage can run into the thousands and may involve replacing flooring.

We run a plumber's auger or drain snake through the trapway and into the branch line. If the clog is deeper, we scope it with a sewer camera and clear it with a hydro jetting machine. Repeated clogs usually mean a partial blockage in the branch line or the main drain, not the bowl. Plunging it over and over can damage the wax ring and spread the problem.

We pull the bowl, inspect the flange, replace any broken closet bolts, and reset the toilet on a fresh wax ring. Shims level the base so it doesn't rock when you sit down. A rocking toilet stresses the wax ring and the flange. Left alone, it can crack the flange and turn a simple reset into a flange repair.
A running toilet can send 200 gallons a day down the drain, which shows up on your Houston water bill fast. We replace the flapper, fill valve, or flush assembly with a matched part and verify the seal holds through three full cycles before we pack up.
A failed wax ring lets water creep under the tile, and by the time you smell it, the subfloor is soft. Our leaky toilet repair Houston service pulls the bowl, inspects the flange, sets a new wax ring, and checks for moisture so a small fix doesn't become a floor replacement.
Store-bought augers and chemical drain openers crack porcelain and eat through seals. We use a plumber's auger or drain snake sized to the trapway, clear the blockage, and test flush twice. If the clog is deeper in the line, we scope it with a sewer camera before recommending anything bigger.
One working toilet in a house of four is a countdown timer. We schedule toilet repair Houston appointments across Houston during our hours — Monday through Sunday, 7:00 AM to 10:00 PM — and our techs arrive with the parts to finish the job in one trip. Most calls are resolved in under two hours from arrival.
Clear records you can keep and share.
Approved before any work starts
Shown and handed over on request
Three cycles before we leave
Not every toilet problem is the bowl. Hard water, slab movement, and older drains change what fails and how often. Knowing the difference saves money.
Scale builds on flappers and valve seats, so toilets run and refill on their own. Descaling the seat during a repair extends the life of the new part.
Movement stresses the wax ring and can crack the flange. Resetting the bowl early costs far less than repairing a water-damaged subfloor.
If one toilet backs up every few weeks, the bowl isn't the problem. A camera inspection shows whether scale or root intrusion is narrowing the line.

Outside these areas? Call and ask if we can reach you. (346) 776-8560
Usually a flapper that no longer seals, a fill valve set wrong, or a chain that is too short or tangled. Houston's hard water scales all three. A new flapper or fill valve fixes most running toilets in one visit.
The wax ring has failed or the flange underneath is cracked or set too low. A rocking toilet will only get worse, and water at the base rots the subfloor. The fix is a new wax ring and, if needed, a flange repair.
A clogged rim jet, a low tank water level, or a vent problem. We check the tank, the jets and the drain before deciding, because a weak flush can be a toilet problem or a drain problem.
Yes. Estimates are free, and you approve the written scope before work starts. We are open Monday to Sunday, 7:00 AM to 10:00 PM.
Call (346) 776-8560 for a free estimate. We diagnose the flapper, fill valve, wax ring or flange, fix it, and test the flush before we leave, Monday to Sunday, 7:00 AM to 10:00 PM.
Call us at (346) 776-8560 to book toilet repair or ask a question. We are open Monday to Sunday, 7:00 AM to 10:00 PM, and estimates are free.
The fastest way to book is a phone call. Tell us what is happening and we will give you a free estimate and a time that works, Monday to Sunday, 7:00 AM to 10:00 PM.
Open Mon–Sun, 7:00 AM–10:00 PM. Free estimates.