Test record
The assembly test result, filed and confirmed
Backflow prevention and testing in Houston is the City-required work that keeps contaminated water out of the public supply. A backflow preventer stops contaminated water flowing back into the public supply, and Houston requires it to be tested by the right person, on the right schedule, with the result filed. El Primo Lalo Plumbing handles backflow testing, installation and repair in Houston under the City's Cross-Connection Control Program.
Every backflow call covers the same ground: identification, licensed testing, filing and repair. If the assembly fails, we explain the failure before we repair it.


We repair backflow assemblies for Houston homeowners and arrange testing by a TCEQ-licensed tester, most often on irrigation systems and pools. Every test is filed with the City, and every failure is explained before it is repaired.
Commercial properties carry the most assemblies: irrigation, pools, fire sprinkler systems and commercial kitchens. Testing runs on a compliance schedule, and the licensed tester files every result.
Backflow testing must be done by a TCEQ-licensed backflow prevention assembly tester registered with Houston's Cross-Connection Control Program, with results filed through SwiftComply. Testing happens at installation, after any repair or relocation, and annually after that. Not every home needs annual testing; it depends on the hazard, such as an irrigation system, a pool, or a fire sprinkler system.
The assemblies are the reduced pressure zone assembly for high hazards, the double check valve assembly, and the pressure vacuum breaker. Different water providers run different programmes: Houston Public Works runs the City's programme, while municipal utility districts run their own. We confirm which programme covers your Houston address before the test is scheduled.
Backflow testing is a compliance job. The tester, the schedule and the filing all matter.
Every backflow job follows the same five steps, so the test, the filing and the record are all clean.

Tests the assembly to the City's requirements, with calibrated gauges.

Identifies the assembly type and the hazard it protects.

Files the test result with the City's Cross-Connection Control Program.

Common repair parts for reduced pressure zone, double check and vacuum breaker assemblies.

Measures the assembly's performance during the test.

Isolates the assembly for testing without shutting down the building.

The test record, assembly details and filing confirmation, kept for you.

Tracks annual test dates so no assembly misses its deadline.
A licensed tester tested every assembly on the property and filed the results through SwiftComply; we repaired the one that failed, and the licensed tester retested it the same week.
Both assemblies needed annual testing. A licensed tester tested them and filed the results, and we set a reminder for next year's deadline.
The assembly failed its test. We repaired it, a licensed tester retested it, and the clean result was filed so the restaurant stayed compliant.
The assembly needed its annual test. A licensed tester tested it and filed the result, and we gave the property manager the records for the file.
Backflow work is commercial and irrigation-led, not neighbourhood-led: the Galleria and Energy Corridor, the Medical Center, Downtown offices, and newer subdivisions where every irrigation system carries an assembly that needs an annual test.
An office park had a dozen irrigation assemblies due for annual testing, with no record of which had been tested.
A licensed tester tested every assembly and filed the results through SwiftComply, and we set a compliance schedule so none misses its deadline again.
A compliance schedule is the difference between a test and a missed deadline.
A restaurant's backflow assembly failed its annual test, and the kitchen line was at risk.
We repaired the assembly, a licensed tester retested it, and the clean result was filed. The restaurant stayed open and compliant.
A failed assembly is repaired and retested, not ignored.
A homeowner had two assemblies, one on the pool and one on the irrigation system, and no test records.
A licensed tester tested both and filed the results, and we gave the homeowner a single record with both assemblies and next year's dates.
Two assemblies, one record, one deadline to remember.
Most backflow calls fall into a few categories. Compliance is the thread through all of them.

Assemblies are tested at installation, after any repair or relocation, and annually after that. A licensed tester tests the assembly and files the result.

A failed assembly is repaired or replaced and retested, so the filing is clean and the property stays compliant.

A new assembly is installed and tested at installation, with the result filed through SwiftComply.

We identify every assembly on the property, arrange testing by a licensed tester, and build a single record with next year's dates.
Testing, filing and repair handled together, so no assembly misses its deadline.
Testing by a TCEQ-licensed backflow prevention assembly tester registered with the City, so the result has legal standing.
Test records, assembly details and filing confirmations kept in one place for you.
A failed assembly is repaired and retested, not left to fail again next year.
Clear records you can keep and share.
The assembly test result, filed and confirmed
Type, location and hazard for every assembly
Next test dates so nothing is missed
A backflow test is only half the job. The result has to be filed with the City, and a failed assembly has to be repaired and retested, or the filing means nothing.
Done by a TCEQ-licensed backflow prevention assembly tester registered with the City, to the City's requirements.
Results filed through SwiftComply with the Cross-Connection Control Program.
A failed assembly is repaired or replaced and retested, so the filing is clean.

Outside these areas? Call and ask if we can reach you. (346) 776-8560
A backflow preventer stops contaminated water flowing back into the public water supply. You need one when there is a hazard, such as an irrigation system, a pool, or a fire sprinkler system. Not every Houston home needs one.
At installation, after any repair or relocation, and annually after that. Testing must be done by a TCEQ-licensed backflow prevention assembly tester registered with the City's Cross-Connection Control Program, with results filed through SwiftComply.
A TCEQ-licensed backflow prevention assembly tester registered with Houston's Cross-Connection Control Program. Testing by anyone else has no legal standing with the City.
It has to be repaired or replaced and retested. The failure is explained, the assembly is repaired or replaced, and a licensed tester retests it so the filing is clean.
Yes. Estimates are free, and you approve the written scope before work starts. We are open Monday to Sunday, 7:00 AM to 10:00 PM.
Call (346) 776-8560 for a free estimate. We confirm your provider's programme, test the assembly, and file the result, Monday to Sunday, 7:00 AM to 10:00 PM.
Call us at (346) 776-8560 to book backflow testing or ask a question. We are open Monday to Sunday, 7:00 AM to 10:00 PM, and estimates are free.
The fastest way to book is a phone call. Tell us what is happening and we will give you a free estimate and a time that works, Monday to Sunday, 7:00 AM to 10:00 PM.
Open Mon–Sun, 7:00 AM–10:00 PM. Free estimates.